CONT
====

Command
-------

**CONT** filename

Examples
--------

::

   >CONT PROG1.COM

This will load and run the CP/M program ’PROG1.COM’.

The three character file type extension does not have to be specified
for .COM files but must be included for HUNTER Basic files, for example,
a HUNTER Basic program has the name ’SORT.HBA’, the following would load
and execute the program via the Basic interpreter:

::

   >CONT SORT.HBA

Remarks
-------

If at any time during execution of a program initiated with ’CONT’,
HUNTER is switched off or power down takes place, switching HUNTER on
will cause the program to continue execution from the point at which
power was removed.

Escape from ’CONT’ mode during program execution is made by pressing CTL
+ C when power **is off**, and then pressing PWR to power on while
keeping CTL + C depressed. Two ’beeps’ should be heard, when the keys
should be released. Then enter the special security number, the default
for which is 56580.

If an error is made, the Hunter will ’beep’ and return to program
execution.