Case Sealing
============

All HUNTER's are built with integral seals to provide a high degree of
protection against atmospheric moisture, corrosive gases and accidental
immersion, therefore HUNTER should not be opened.

The Battery Seal
----------------

This is a small 'O' ring seal running in a machined groove in the
battery plug and seated on a machined face in HUNTER casing.

This seal requires a smear of silicon grease to assist in seating.

Seal Specification
------------------

============ =========
Dimension    Part no.
============ =========
1.5mm x 30mm HUN-05710
============ =========

Replacement seals may be obtained from HUSKY Computers or authorised
agents.