User Tools

Site Tools


demos:save

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
demos:save [2017/07/21 12:25]
ncc [Description]
demos:save [2017/07/22 21:05] (current)
ncc
Line 9: Line 9:
 The SAVE command places //n// pages (256-byte blocks) into a file from the TPA and names this file //ufn//. In the CP/M distribution system, the TPA starts at 100H (hexadecimal) which is the second page of memory. The SAVE command must specify 2 pages of memory if the user's program occupies the area from 100H through 2FFH. The machine code file can be subsequently loaded and executed. ​ The SAVE command places //n// pages (256-byte blocks) into a file from the TPA and names this file //ufn//. In the CP/M distribution system, the TPA starts at 100H (hexadecimal) which is the second page of memory. The SAVE command must specify 2 pages of memory if the user's program occupies the area from 100H through 2FFH. The machine code file can be subsequently loaded and executed. ​
  
-The following are examples of the SAVE command:+==== Examples ==== 
  
 <​code>​ <​code>​
demos/save.txt · Last modified: 2017/07/22 21:05 by ncc