COMS

Command

COMMS

Explanation

Initialise the communications parameters.

Examples

Two screens are used to select the communications parameters as follows:

------------------------------------------
|         Transmission Parameters        |
|                                        |
|   Rate-2400  Prtcl-none     Pty-8bit   |
|                                        |
| CTS-n DTR-n LF-n Echo-n T/O-no Null- 0 |
|                                        |
|       press ENTER if acceptable.       |
------------------------------------------
------------------------------------------
|          Receiving Parameters          |
|                                        |
|   Rate-2400  Prtcl-none     Pty-8bit   |
|                                        |
| RTS-off  DSR-n DCD-n  T/O-no Serig-off |
|                                        |
|       press ENTER if acceptable.       |
------------------------------------------

Remarks

See Communications for information on selecting communication parameters.

Communication parameters are not reset when HUNTER is powered off.

In CP/M the serial communications interface is assigned the following logical devices:

Transmit: LST: PUN:
Receive: RDR: